Min menu




 Preflight /Walkaround Inspection.
technical 21 August 2021
  Preflight /Walkaround Inspection. A preflight inspection (also called a walk around) is an essential requirement before an aircraft flies!...
read more
Ultrasonic Instruments
technical 20 August 2021
Ultrasonic  Instruments   A the portable, the battery-powered ultrasonic instrument is used for field inspection of airplane structure. The ...
read more
technical 18 August 2021
  TYPES OF CORROSION     All corrosive attacks begin on the surface of the metal making the classification of corrosion by physical appearan...
read more
P30 pressure sensor
technical 17 August 2021
  P30 pressure sensor P30 pressure sensor manifold - Dry trough vacuum The purpose of P30 is to provide the EEC with a sense of HP Compresso...
read more
 Aneroid barometer
technical 14 August 2021
  Aneroid barometer To provide a common reference, the International Standard Atmosphere (ISA) has been established.  These standard conditi...
read more
Coriolis Force
technical 12 August 2021
  Coriolis Force In general atmospheric circulation theory, areas of low pressure exists over the equatorial regions and areas of high press...
read more
Power Transfer Unit
technical 30 July 2021
  Power Transfer Unit The PTU is a fixed-displacement, unidirectional device used to transfer fluid power from hydraulic system 1 to hydraul...
read more
technical 27 July 2021
  Engine-Driven Pump The hydraulic system uses an EDP to supply the pressurized hydraulic fluid for the flight control system and utility sy...
read more
Hydraulic Reservoir
technical 24 July 2021
  Hydraulic Reservoir The hydraulic reservoir is used to hold the volume of fluid, transfer heat from the system, allow solid contaminants t...
read more
technical 23 July 2021
  Hydraulic Accumulator The hydraulic accumulator is an energy storage device in which one end is closed and another is connected to the hyd...
read more
Turbine Section
technical 20 July 2021
  Turbine Section The turbine transforms a portion of the kinetic (velocity) energy of the exhaust gases into mechanical energy to drive the...
read more
technical 19 July 2021
  blades The blades are retained in their respective grooves by a variety of methods, the more common of which are peening, welding, lock ta...
read more
Turbofan Engines
technical 18 July 2021
  Turbofan Engines The turbofan gas turbine engine is, in principle, the same as a turboprop, except that the propeller is replaced by a duc...
read more
Fuel/Air Mixtures
technical 17 July 2021
  Fuel/Air Mixtures Gasoline and other liquid fuels do not burn at all unless they are mixed with air. If the mixture is to burn properly wi...
read more
Carburetor Systems
technical 15 July 2021
  Carburetor Systems To provide for engine operation under various loads and at different engine speeds, each carburetor has six systems: 1....
read more
Fuel-Injection Systems
technical 10 July 2021
  Fuel-Injection Systems The fuel-injection system has many advantages over a conventional carburetor system.  There is less danger of induc...
read more
Wind Direction Indicators
technical 19 June 2021
  Wind Direction Indicators It is important for a pilot to know the direction of the wind. At facilities with an operating control tower, ...
read more
Damage Repairable by Patching
technical 17 June 2021
  Damage Repairable by Patching Damage repairable by patching is any damage exceeding negligible damage limits that can be repaired by insta...
read more
Shape of the Airfoil
technical 16 June 2021
 The shape of the Airfoil Individual airfoil section properties differ from those properties of the wing or aircraft as a whole because of t...
read more
Tail Wheel Gear Configuration
technical 15 June 2021
 Tail Wheel Gear Configuration There are two basic configurations of airplane landing gear: conventional gear or tail wheel gear and the tri...
read more